一 基础环境

主机名	系统版本	MySQL版本	主机IP
Master01	CentOS 6.8	MySQL 5.6	172.24.8.10
Master02	CentOS 6.8	MySQL 5.6	172.24.8.11
VIP	172.24.8.12

二 实际部署

2.1 安装MySQL

1 [root@Master01 ~]# yum list installed | grep mysql	#查看是否存在其他MySQL组件  2 [root@Master01 ~]# yum -y remove mysql-libs.x86_64	#为避免冲突引发报错，卸载已存在的组件

 

1 [root@Master01 study]#  yum localinstall mysql-commu* -y  2 [root@Master01 ~]# chkconfig --list | grep mysqld		#查看MySQL是否加入启动项  3 [root@Master01 ~]# chkconfig mysqld on

 

2.2 初始化MySQL

1 [root@Master01 ~]# service mysqld start  2 [root@Master01 ~]# mysql_secure_installation  3 [root@Master01 ~]# service iptables stop  4 [root@Master01 ~]# chkconfig iptables off  5 [root@Master01 ~]# vi /etc/sysconfig/selinux  6 SELINUX=disabled

 

注意：以上操作在Master02主机上也需要执行。

安装参考：http://www.cnblogs.com/007sx/p/7083143.html

2.3 master01 my.cf配置

1 [root@Master01 ~]# vi /etc/my.cnf  2 [mysqld]  3 ……  4 server-id=1				#设置主服务器master的id  5 log-bin=mysql-bin			#配置二进制变更日志命名格式  6 replicate-wild-ignore-table=mysql.%  7 replicate-wild-ignore-table=test.%  8 replicate-wild-ignore-table=information_schema.%

 

注意：

master开启二进制日志后默认记录所有库所有表的操作，可以通过配置来指定只记录指定的数据库甚至指定的表的操作，具体在mysql配置文件的[mysqld]可添加修改如下选项：

方法一：

1 # 不同步哪些数据库  2 binlog-ignore-db = mysql  3 binlog-ignore-db = test  4 binlog-ignore-db = information_schema  5 # 只同步哪些数据库，除此之外，其他不同步  6 binlog-do-db = mysqltest

 

方法二：

建议采用以下方式配置过滤：

1 replicate-wild-ignore-table=mysql.%	#从库配置不同步表  2 replicate-wild-do-table=test.%		#从库配置需要同步的表

 

提示：不要在主库使用binlog-ignore-db和binlog-do-db，也不要在从库使用replicate-wild-ignore和replicate-wild-do-table。

2.4 创建账号

1 [root@Master01 ~]# mysql -uroot -p  2 Enter password:  3 mysql> grant replication slave on *.* to 'repl_user'@'172.24.8.11' identified by 'x12345678';  4 mysql> grant all privileges on *.* to 'root'@'172.24.8.%'  identified by 'x120952576' with grant option;  5 mysql> flush privileges;  6 [root@Master01 ~]# service mysqld restart  7 [root@Master01 ~]# mysql -uroot -p  8 Enter password:  9 mysql> show master status;

 

master01：

file：mysql-bin.000001

position：120

2.5 smaster02 my.cf配置配置

1 [root@Master02 ~]# vi /etc/my.cnf  2 [mysqld]  3 server-id=2				#设置主服务器master的id  4 log-bin=mysql-bin			#配置二进制变更日志命名格式  5 replicate-wild-ignore-table=mysql.%  6 replicate-wild-ignore-table=test.%  7 replicate-wild-ignore-table=information_schema.%  8 read_only=1

 

2.6 创建账号

1 [root@Master02 ~]# mysql -uroot -p  2 Enter password:  3 mysql> grant replication slave on *.* to 'repl_user'@'172.24.8.10' identified by 'x12345678';  4 mysql> grant all privileges on *.* to 'root'@'172.24.8.%'  identified by 'x120952576' with grant option;  5 mysql> flush privileges;  6 [root@Master02 ~]# service mysqld restart  7 [root@Master02 ~]# mysql -uroot -p  8 Enter password:  9 mysql> show master status;

master02：

file：mysql-bin.000001

position：120

三 启动主从

3.1 手动同步

如果Master01和Master02已经存在数据，则在开启主备复制之前，需要将Master01和Master02手动同步一次（/var/lib/mysql整个目录打包tar.gz），具体方法略。

注意：本实验都是重新安装的MySQL，可直接启动同步。

3.2 启动Master01的slave功能

1 [root@Master01 ~]# service mysqld restart  2 [root@Master01 ~]# mysql -uroot -p  3 Enter password:  4 mysql> change master to master_host='172.24.8.11',  5 master_user='repl_user',  6 master_password='x12345678',  7 master_log_file='mysql-bin.000001',  8 master_port=3306,  9 master_log_pos=120; 10 mysql> start slave; 11 mysql> show slave status\G			#查看slave状态

 

3.3 启动Master02的slave功能

1 [root@Master02 ~]# service mysqld restart  2 [root@Master02 ~]# mysql -uroot -p  3 Enter password:  4 mysql> change master to master_host='172.24.8.10',  5 master_user='repl_user',  6 master_password='x12345678',  7 master_log_file='mysql-bin.000001',  8 master_log_pos=120;  9 mysql> start slave; 10 mysql> show slave status\G			#查看slave状态

 

提示：

slave的I/O和SQL线程都已经开始运行，而且Seconds_Behind_Master不再是NULL。日志的位置增加了，意味着一些事件被获取并执行了。如果你在master上进行修改，你可以在slave上看到各种日志文件的位置的变化，同样，你也可以看到数据库中数据的变化。

四 安装Keepalived

4.1 下载

1 [root@Master01 ~]# wget http://www.keepalived.org/software/keepalived-1.3.6.tar.gz  2 [root@Master01 ~]# tar -zvxf keepalived-1.3.6.tar.gz -C /tmp/  3 [root@Master01 ~]# cd /tmp/keepalived-1.3.6  4 [root@Master01 keepalived-1.3.6]# ./configure --prefix=/usr/local/keepalived/ --sysconf=/etc --with-init=SYSV  5 #注：(upstart|systemd|SYSV|SUSE|openrc) #根据你的系统选择对应的启动方式  6 [root@Master01 keepalived-1.3.6]# make && make install  7 [root@Master01 ~]# ln -s /usr/local/keepalived/sbin/keepalived /sbin  8 [root@Master01 ~]# chmod u+x /etc/init.d/keepalived  9 [root@Master01 ~]# chkconfig --add keepalived 10 [root@Master01 ~]# chkconfig --level 35 keepalived on

 

注意：Master02上也需要如上操作。

若出现以下提示，需要执行：yum -y install openssl-devel。

提示：也可采用yum install -y keepalived安装（个人不建议）。

4.2 Master01配置Keepalived

默认情况下keepalived启动时会去/etc/keepalived目录下找配置文件。

1 [root@Master01 ~]# vim /etc/keepalived/keepalived.conf  2 ! Configuration File for keepalived  3 global_defs {  4    notification_email {  5     x120952576@126.com  6 #表示keepalived在发生诸如切换操作时发送Email给哪些地址，邮件地址可以多个，每行一个。  7    }  8    notification_email_from Alexandre.Cassen@firewall.loc  9    smtp_server 172.24.8.10 10    smtp_connect_timeout 30 11    router_id LVS_DEVEL 12 } 13 vrrp_instance VI_1 { 14     state BACKUP 15     interface eth0 16     virtual_router_id 51 17 #这里设置VRID，这里非常重要，相同的VRID为一个组，他将决定多播的MAC地址 18     priority 100 19     advert_int 1 20     nopreempt 21 #不抢占，只在优先级高的机器上设置即可，优先级低的机器不设置 22     authentication { 23         auth_type PASS 24         auth_pass 1111 25     } 26 track_script { 27     check_mysqld		#执行定义的监控脚本 28 } 29     virtual_ipaddress { 30         172.24.8.12 31     } 32 } 33 vrrp_script check_mysqld { 34     script"/etc/keepalived/mysqlcheck/keepalived_check_mysql.sh " 35     interval 2 36 }

 

4.3 创建检测脚本

1 [root@Master01 ~]# mkdir -p /etc/keepalived/mysqlcheck/  2 [root@Master01 ~]# vi /etc/keepalived/mysqlcheck/keepalived_check_mysql.sh  3 #!/bin/bash  4 MYSQL=/usr/bin/mysql  5 MYSQL_HOST=localhost  6 MYSQL_USER=root  7 MYSQL_PASSWORD=x120952576  8 CHECK_TIME=3  9 #mysql  is workingMYSQL_OK is 1 , mysql down MYSQL_OK is 0 10 MYSQL_OK=1 11 function check_mysql_helth (){ 12 $MYSQL -h $MYSQL_HOST -u $MYSQL_USER -p${MYSQL_PASSWORD} -e "show status;" >/dev/null 2>&1 13 if [ $? = 0 ] ;then 14         MYSQL_OK=1 15 else 16         MYSQL_OK=0 17 fi 18 return $MYSQL_OK 19 } 20 while [ $CHECK_TIME -ne 0 ] 21 do 22         let "CHECK_TIME -= 1" 23         check_mysql_helth 24         if [ $MYSQL_OK = 1 ] ; then 25                 CHECK_TIME=0 26                 exit 0 27         fi 28         if [ $MYSQL_OK -eq 0 ] &&  [ $CHECK_TIME -eq 0 ] 29         then 30                 /etc/init.d/keepalived stop 31                 exit 1 32         fi 33         sleep 1 34 done 35 [root@Master01 ~]# chmod u+x /etc/keepalived/mysqlcheck/keepalived_check_mysql.sh 36 [root@Master01 ~]# service keepalived start

 

4.4 Master02配置Keepalived

1 [root@Master01 ~]# scp /etc/keepalived/keepalived.conf root@127.24.8.11:/etc/keepalived/

参考Master01配置，去掉nopreempt选项，priority设置比Master01低即可。

4.5 创建检测脚本

1 [root@Master02 ~]# mkdir -p /etc/keepalived/mysqlcheck/  2 [root@Master01 ~]# scp /etc/keepalived/mysqlcheck/keepalived_check_mysql.sh root@172.24.8.11:/etc/keepalived/mysqlcheck/  3 [root@Master02 ~]# chmod u+x /etc/keepalived/mysqlcheck/keepalived_check_mysql.sh  4 [root@Master02 ~]# service keepalived start

 

五 功能测试

5.1 测试vip

1 [root@test ~]# mysql -uroot -h172.24.8.12 -p

1 mysql> show variables like "%hostname%";  2 mysql> show variables like "%server_id%";

 

5.2 同步测试

1 [root@test ~]# mysql -uroot -p  2 Enter password:  3 mysql> create database mysqltest;  4 mysql> use mysqltest;  5 mysql> create table user(id int(5),name char(10));  6 mysql> insert into user values (00001,'zhangsan');  7 在Slave从服务器上进行验证：  8 [root@Master02 ~]# mysql -uroot -p  9 Enter password: 10 mysql> show databases; 11 mysql> select * from mysqltest.user;

 

5.3 测试Keepalived切换

1 [root@Master01 ~]# service mysqld stop				#停止Master01的MySQL  2 [root@Master01 ~]# tail -f /var/log/messages			#观察Master01的日志

 

1 [root@Master02 ~]# tail -f /var/log/messages			#观察Master02的日志

1 [root@Client ~]# mysql -uroot -h172.24.8.12 -px120952576	#客户端连接VIP

注意：已经成功切换，在切换过程中可能中断几秒。

参考：